2519392 1
Introduction
A leveling kit, also known as a ‘Level Kit’, is designed to lift the front of a dual leveled truck without raising the back. This increase in the truck’s height is accomplished by installing 2-3 inch taller springs, spacers, and shock extenders on the front only. By doing this, your truck will look level once again and maintain stock shocks and suspension geometry while still preserving OEM ride quality.
A suspension lift, unlike a leveling kit, includes all four corners of your vehicle with components that can include shocks or coilovers with adjustable height adjusters or airbags. This increases both ground clearance and off-road performance with maximum degree angles and enhanced clearance for oversized tires. The improved ride quality and performance of a suspension lift comes at the expense of additional parts and installation costs.
Understanding the differencebetween these two types of lifts is extremely important when considering stacking a leveling kit on top of a suspension lift. For one thing, you may end up forgoing all of your off-road upgrades by theoretically “canceling out” all gains from the suspension lift. Additionally different sizing between components used during installation may cause improper fitment potentially leading to premature wear or even shorting out on vital components such as wiring harnesses or alternators under extended use scenarios like rock crawling. Because of this experts recommend stacking with caution so as to keep yourself safe while still enjoying all gains made provided by properly equipped truck setups utilizing these two types of lifts together correctly No matter which type you get though it’s always recommended to have an experienced technician perform any modifications for everyone’s safety!
Benefits of Installing a Leveling Kit on a Suspension Lift
Installing a Leveling Kit on a Suspension Lift can bring many benefits to your vehicle. While traditional lifts tend to raise the entire body of your car or truck, a Leveling Kit raises only the front portion, allowing you to better maintain its ‘leaning’ forward look while also enjoying enhanced ground clearance. Additionally, this type of lift enhances handling as it reduces the amount torque opposed by the suspension when cornering. As a result, improved gas mileage may be obtained due to reduced drag and engine workload when your vehicle is moving in an upward direction. Furthermore, the installation of larger tires is possible with fewer issues since the taller height reduces fender-rubbing incidents on turns and bumps. Lastly, installing a Leveling Kit may improve overall ride quality since more weight is transferred away from connecting points with less strain on shocks and joints.
Installation Basics
It is possible to stack a leveling kit on a suspension lift, however, it is strongly advised that those who are attempting this task understand the complexity of the job at hand. For starters, it is important to have the necessary tools for the job which might include a wrench set, screwdriver set, hex key set/(allen wrenches), and level. Additionally, one should consider purchasing a 2″ coil spring spacers to help with wheel clearance issues from spacers.
The first step in stacking a leveling kit onto a suspension lift is to measure precisely how much lift you want your vehicle to have on each side – i.e both sides should be even for perfect balance when lifting your vehicle. Next, you should install any new shocks or components that may be necessary before beginning with the installation of any leveling kit items such as brackets or spacers. Once everything is installed in place and has been properly tightened, you can then begin installing the desired leveling kit into place. Depending on the type of leveling kit chosen, there will be different instructions that need to follow during install time such as mounting and attaching components; making sure to properly tighten all nuts/bolts; measuring alignment while driving once completed etc. Ensure that after every step in process that everything has been tightened up properly so as not to induce any rattling at higher speeds or cause any misalignment issues when lifting your vehicle too high from what recommended heights are given from manufacturer level kits instructions found in provided guide booklets or online resources.
Common Issues with Stacking a Leveling Kit on a Suspension Lift
When it comes to stacking a leveling kit on a suspension lift, there are several issues that need to be taken into account to ensure that the work is done correctly. Firstly, an incorrect setup can lead to unfavorable performance outcomes, such as poor steering and handling, as well as imbalanced pressure between the two axles. Additionally, it is important to make sure that all components involved in the lift are properly sized for safety, otherwise they may end up being too weak or too strong and could cause even more problems. Uneven tire pressure can also arise with this type of job if appropriate caution is not exercised, leading to premature tire wear among other potential issues. Then, lastly, be aware that due to the extra strain imposed on the rest of your vehicle’s components such as shocks and brakes by having a leveled and lifted set up, these parts may experience accelerated wear or breakdown sooner than expected. Therefore when stacking a leveling kit on a suspension lift it is necessary to consider these potential problems before beginning any modifications so you can ensure a safe outcome!
Professional Installation
Yes, you can stack a leveling kit on a suspension lift. Having both components installed together may provide the most advanced off-roading experience possible. However, it is important to hire a qualified and experienced professional technician to handle both the installation and ongoing maintenance of the components.
A professional technician will be able to ensure that the components are properly designed and correctly fitted. This is essential as there can be unexpected issues while attempting an install alone due to lack of experience or knowledge of how each component functions. In addition, fuel economy can be greatly reduced if the wrong parts are used in assembling the components, leading to unnecessary wear and tear on your vehicle’s suspension. The technician can also check for any necessary grade gear compatibility before beginning work on installation, allowing for smooth performance when taking your vehicle off-roading again in the future.
Moreover, hiring an experienced technician helps guarantee safety on the road and provides peace of mind as any issue encountered throughout use can be quickly addressed with their expertise. Allowing them to handle all operations also allows for optimal control over ground stiffness and clearance allowing you to maximize your off-roading experience using both the leveling lift and leveling kit together effectively.
Safety Considerations
A leveling kit is designed to raise the front end of a vehicle, while a suspension lift changes the geometry and allows for more clearance under the vehicles. It is not recommended that you stack a leveling kit on top of a suspension lift as this will alter the center of gravity and increase the risk of rollover and excessive wear on your suspension component due to improper angles. If you wish to achieve greater heights with increased clearance, it is best practice to combine different types of lifts such as body lift, shackle lifts or even nitrogen based lift kits. Before mixing different kits and attempting larger lifts, it is important to consult an expert in off-road suspension technology and make sure all necessary inspection and maintenance items are completed regularly, especially when travelling off-road. As an additional precaution, it is also recommended to keep the weight distribution equal across the axles to prevent excess strain on one side or another. Furthermore, safety kits should be carried at all times such as first aid briefings, tow straps, off-road satellite phones etc., in case of breakdowns in remote areas.
Conclusion
In conclusion, when it comes to stacking a leveling kit on a suspension lift, it is important to take all necessary precautions. It is important to closely research the type of lift you’re planning to install and make sure that you hire qualified professionals. It is also essential to make sure that they are properly trained and have the right tools for the job, including any jacking equipment needed. Finally, make sure that safety and maintenance requirements are followed throughout the installation process. With proper planning and preparation, you can stack a leveling kit on a suspension lift in no time!
