ga6ac24133ac36a4c050c3349ff7a0dc20c08fbb93b4157b002568030df3627e608b4882fcf14cd90b3b33d366ffa9088
Introduction
F150 fender flares are an excellent choice when looking to cover rust marks on your vehicle. These parts provide superior protection from the elements, helping to block dirt, rain, and other road debris from getting into hard-to-reach places that could cause further corrosion on the metal if left exposed. Not only do these flares offer added peace of mind for those looking for extra protection for their vehicles, but they also give your F150 an aesthetic boost.
When picking out the right set of fender flares for your vehicle, consider what type of style you’re looking for in addition to which material would best suit your needs (plastic or metal). If you plan on keeping your F150 a long time and driving it off-road or in harsh conditions, we recommend going with a more durable material like metal. Also think about how easy they are to install and how they will fit over existing rusted areas since some may require trimming or modifications during the installation process.
Installing F150 fender flares is straightforward but can take some time depending on your experience level and how much adjustment is necessary during the installation process. First, make sure to clean up any excess rust around the area where you plan on attaching the flare before starting which will ensure a secure and stable fit once done. Afterwards you should use either self-tapping screws or bolts (depending on the material and design) to mount them onto your existing structure before finally tightening it down and adding additional sealant if needed.
All in all, purchasing F150 fender flares are an ideal way to protect against rust damage and add visual appeal to your car while doing so! Be sure to do your research beforehand considering look, installing difficulty and durability before making a purchase!
Advantages of F150 Fender Flares
F150 fender flares provide excellent coverage for rust prevention. The design of the flares allows them to protect the vehicle from dirt and other road hazards. Furthermore, F150 fender flares are created with a durable material making them long-lasting and reliable. They fit securely over your wheel wells, helping to keep dirt and debris out while shielding exposed paint from chips and scratches. In addition, these flares give your vehicle a sporty look as they stick out further than traditional fender shields. This makes them an attractive option for those looking to add style to their ride while keeping it protected from rust. Depending on the model you choose, they may also come with LED lights giving your car extra visibility at night in order to increase safety on the roads.
Materials Used
F150 fender flares are available in several different materials, each with its own unique advantages and disadvantages. ABS plastic is the most common material option because it is lightweight, easy to cut and fit, relatively durable, and inexpensive, making it ideal for basic protection against road debris and rust. Polymer plastic is another good option because of its high durability and resistance to paint chipping. However, it’s more expensive than ABS plastic and requires specialized tools for cutting and crafting.
Steel is great if you’re looking for heavy-duty protection that won’t crack or chip easily but can be difficult to install due to sheer weight. Aluminum fender flares are the lightest choice but may not provide as much protection from rocks and other road debris due to their tendency to dent. Fiberglass fender flares are very durable but also very costly – so they’re best suited for people who only want the best protection available without spending a lot of time or money on installation.
How to Choose the Right Fender Flares for Your F150
When choosing the right fender flares for an F150, it’s important to consider several key factors. First, you must determine what make and model of your F150 you want to cover with the flares. Next, you should ensure that the flares will fit both your vehicle’s size and shape. Finally, it’s wise to research how presentable the flares will look once installed on the vehicle’s exterior.
When selecting fender flares based on make and model, be sure to check out the manufacturer’s websites for vehicle-specific product information. You can also consult online shopping sites or auto parts stores to compare different models and styles before making a final decision regarding the flares that fit best with your vehicle.
To determine if fender flares are an appropriate fit based on size and shape, measure your F150’s wheels in order to get an accurate estimate of size. Then match those measurements up against Universal Flares sizing standards which can usually be found on their website. Remember also that standard universal sized fender flares may not necessarily fit every F150 correctly without some modifications being made such as cutting or molding them beforehand.
Lastly, considering how well-suited they are aesthetically is just as important as finding a flare that fits perfectly in terms of its size and shape. Therefore be sure to assess how well the fender flare options available visually match up with vehicles other components like its trim panels or body color. With these details in mind, you can now safely purchase good-looking fender flares knowing they will properly cover up rusting areas while giving your F150 an attractive new look!
Installation Steps
1.Park the Ford F150 on a flat surface and allow it to remain cool after shutting off the engine before beginning the installation process.
2.Using a jack and jack stands, raise the front end of the vehicle in order to gain access to the front fender flares, while ensuring safety by properly placing the stands and chocking the wheels.
3.Remove all existing plastic trim pieces, clips or screws that are securing the old fender flare in place and set them aside for reuse later if possible. If any bolts are found underneath plastic caps, use a screwdriver or socket extractor tool to remove them.
4.Using a metal putty knife, carefully separate all existing adhesive between fender flares and paint surface while lightly using a heat gun to help release any factory sealants that may be present from factory installation process; carefully insuring that you don’t melt or scratch your F150’s paint finish during this process.
5.Clean exposed areas of rust off with metal brush product – such as Naval Jelly – followed by several coats of rust Inhibitor primer in order to ensure new Fender Flares will have a solid bonding feature with painted surfaces going forward
6.Following primer application steps, apply an even layer of butyl rubber seam sealer (seam sealer is typically black) around each area where body panel meets – essentially where automotive skin and frame/doghouse come together . This provides extra moisture protection from entering into and damaging key components within Ford F150 structure itself over time; for added life expectancy reasons being covered up aren’t visible areas moving forward either! This can also be applied directly onto fender flare mounting locations for additional durability benefit if desired. Seam Sealer does not need excessive amounts – just enough coverage to fill in gaps and coincide with natural curves of vehicles paint job itself should suffice here !
7.Reinstall replacement F-150 flares, piecemeal refastening original hardware pieces back into place save for edges/corners as these will require completely new hardware pieces be utilized once placed onto vehicle; therefore they must be fastened on prior to line up stage which is next!
8Align freshly installed flares correctly once refastened securely so that there is no gap present when painted body panel arrives at new level further down line – Use hose clamp shaped items provided along side instructions (product guide) to help in aligning process here ! Keep adjusting until perfect fitment is reached , then attempt setting permanent seams sealer over those task locations ensuring this material adheres accurately – guaranteed prevention again inclement weather ahead saving components underneath from potential damage/wearing out processes available now too !
9Secure newly adjusted flairs into place stabilizing any followed through places directly using liquid nails (metal putty knife optional) much like another caulk agent before having liquid nails dry out as normal allowing it few hours drying progression time before using vehicle again !
10Now you can take full advantage of your newly installed F-150 Fender Flares giving much needed , subtle look appearance variation you were hoping for along way without committing significant expense making entire task value bearing one overall( when cost savings was primary concern)! Enjoy it friends ……..
Maintenance and Care
Regular maintenance of F150 fender flares is essential for extending their life and protecting them from rust. It is important to keep the fender flares clean, as dirt and debris will trap moisture and cause rusting. If rust is present on these parts, it must be removed using a soft brush and rust remover solution. Take special care not to cause any damage to the paint or the surface of the flares.
It’s also important to regularly check for any loose bolts or fittings that secure the fender flares in place and make sure they are retightened as necessary. This can help prevent water from getting underneath them and causing further rusting or corrosion.
If you’d like to upgrade your F150 fender flares, consider adding UV protectant or wax coatings that help protect against ultraviolet radiation damage, fading, cracking, and peeling. Some types of coatings are polyurethane-based that add shine for a “recently painted” look while others give more of a matte finish. These treatments can help extend the life of your fender flares dramatically increasing their lifespan if taken care of properly.
Conclusion
F150 fender flares are a great way to cover rust and keep you feeling confident while driving on the road. Fenders act as a barrier between you and the environment, meaning they protect you from dust, dirt, mud and even large objects that somehow seem to always find their way onto your vehicle. Additionally, these fenders give your car a unique look, helping it stand out from the rest of the vehicles on the road. With so many types of fender flares available for Ford F-150s, there’s sure to be an option that fits your budget and style perfectly. If you have any questions about installing or selecting the right F150 fender flares for your needs, don’t hesitate to consult a professional mechanic or reach out to one of our customer service representatives who will be happy to assist you in finding what’s best for you.
