7oodlc6sl6e
Introduction
The Ford Escape is a sport utility vehicle that drivers have come to love for its convenience and practicality. Like all vehicles, it can be susceptible to rust, which is caused by moisture being trapped in and around metal surfaces. Rust in cars can prove to be very problematic over time, as it weakens the metal frame and corrodes the paint job. Fender flares on a Ford Escape are a great way to protect the car from rust. These plastic coverings fit into the wheel wells of the car and keep out any moisture or dirt that could cause rusting. They also give your vehicle a more stylish look, adding character and personality to an otherwise plain facade. With this extra layer of protection, you can be sure your Ford Escape will stay looking pristine for many years to come.
Benefits of Installing Fender Flares
Adding fender flares to a Ford Escape is an effective way to cover rust and bring the vehicle back to its original condition. Fender flares are often installed to give the car a better look, however there are several other benefits that come with using them for rust protection.
First, a feature of fender flares is that they offer protection from further rusting. They prevent debris and moisture from causing additional corrosion in the wheel wells due to their raised contours – this can help prolong the life of the vehicle and save on expensive repairs over time. Additionally, fender flares improve aerodynamic performance thereby improving fuel efficiency – another great benefit of installing them on your Ford Escape.
Finally, installing fender flares adds aesthetic value as they come in a wide range of styles and colors that can give any car a unique tasteful look. This will not only make it look sharper but also improves resale value should you decide to sell it at some point down the line. All of these factors make adding fender flares an ideal solution for covering rust on your Ford Escape while ensuring maximum protection against future damage.
Types of Fender Flares Available
Factory-style fender flares are often the most popular option when it comes to covering rust on Ford Escapes. These flares fit over the existing fenders and help to provide additional tire coverage and protection from road debris. They have a sleek factory look that complements the Escape’s already rugged aesthetic.
Riveted-style fender flares provide an edgy, aggressive look to Ford Escapes. The flared portions of these kits are made with ABS plastic, which is strengthened by stainless steel rivets and finished with a matte black finish. Popular styles such as Pocket and Euro offer additional tire clearance while still maintaining a street-legal appearance.
Flat-style fender flares provide a more subtle upgrade option for Ford Escapes than typical factory or riveted-style flares. These designs feature low profile accents that run both horizontally along the sides of the vehicle, as well as diagonally around the wheel wells. They can also be customized with different colors, logos or other elements for your own one-of-a-kind design.
Bolt-on and flush-mount fender flares are among the most extreme options available for Ford Escapes looking to cover rust or add protection from debris without compromising their ride quality or style. Bolt-on flares can quickly be added directly over an existing vehicle’s existing wheels, while flush mount designs completely integrate into the sides of a vehicle. Both of these designs deliver maximum credibility on and off the road while still providing your flair an impressive overall look.
Installation Process
Tools:
-Socket wrench and ratchet
-Pliers
-Flat head Screwdriver
-Drill with bit set
-Pop Rivets
-Automotive Tape
Steps:
1. Park the Escape in a flat, level area and chock the wheels to prevent movement. Use a socket wrench and ratchet to remove any existing trim pieces or hardware from your Ford’s fender wells that could interfere with the installation.
2. Line up your new fender flares with the wheel well openings of the Escape to check fitment. If necessary, use a drill with bit set to enlarge any mounting holes for easier assembly.
3. Adjust the location of each flare on the Escape as needed to ensure proper fitment and hold them in place securely with automotive tape.
4. Finish securing your fender flares in place with pop rivets; use pliers to attach each one to your Ford’s body. Make sure all of your mounts and hardware are lined up properly before tightening them down completely; you might need an extra set of hands for this part if available!
5. Replace all trim pieces and other removed hardware, using a socket wrench or flathead screwdriver as necessary, and make sure they’re secured tightly into place so that no water can get into the wheel well area of your Ford Escape anymore!
Special Considerations: Before beginning this process, be aware that rust can severely weaken metal surfaces so keep an eye out for any signs of deterioration while prepping your Ford’s chassis for installation! Additionally, test fitting is always recommended before fully assembling any components onto your Ford Escape – it can save time during rework later on!
Cost & Warranty
The cost of buying and installing fender flares for a Ford Escape can vary depending on the make, model, and year of the vehicle. Generally speaking, those looking to purchase and install such components should expect to spend around $200 – $300 for higher-end products. This includes installation services if a professional installer is hired to do the job. Furthermore, most good quality manufacturers will also offer some sort of limited warranty covering their products against any prevalent production issue or defect. Such coverage might last anywhere from a few years up to seven years in some cases. It’s wise to research the exact product you plan on buying so that you can be certain what protection is afforded by its manufacturer in case issues arise down the road.
Summary & Review
The Ford Escape comes factory-fitted with fender flares designed to protect the underlying body from corrosion. These fender flares are engineered to keep dirt, mud, and other debris from being able to accumulate around the edges of the wheel well, thus preventing the build-up of rust. The fender flares also offer protection to the wheelwell itself, as they prevent any direct contact between wheel components and exposed metal within the wheelwell. As an additional layer of safety, these fender flares come pre-coated with black finish that is specifically designed to resist corrosion — thereby keeping rust at bay.
In conclusion, Ford Escape fender flares offer an effective way to protect your ride from unnecessary wear and tear caused by exposure to road salt and other elements. Not only do they help keep rust away, but they also extend the life of your vehicle while providing a sleek new look.
Resources
Consumer Reviews: Consumers can use sites like Consumer Reports and Edmunds to read through reviews from other Escape owners on their experiences with purchasing and installing fender flares.
Tutorials: Consumers may want to search YouTube for step-by-step tutorials on how to install new fender flares on an Escape. This can give the consumer a more visual walkthrough on how the job should be done before attempting it themselves.
Tips: Checking forums like EscapeTalk or searching online for specific articles dedicated to tips on installing Ford fender flares can help provide insight into best practices as well as potential pitfalls that one should look out for.
